Guangzhou Aolitai Building Materials Industrial Co., Ltd.

This product is a cement-based dry powder material that is especially suitable for paving and caulking of paper tiles, small and medium-sized ceramic tiles, mosaics and other materials. Greatly reduce material and labor costs and improve construction efficiency. Compared with the traditional cement slurry pasting method, the bonding force is stronger, the bonding is firmer and safer, and it has superior properties such as mildew resistance and strong bonding force. [Product Features]
●Two-in-one decorative material with tile adhesive and caulking agent, which can significantly improve work efficiency and is convenient and fast.
●There is no need to soak bricks into wet walls, which significantly improves work efficiency and makes construction convenient and fast.
●Excellent waterproof, mildew-proof, anti-seepage, and gap-filling effects.
●Excellent flexibility, no shrinkage or hollowing.
●Compared with cement caulking, it has better anti-seepage and anti-cracking properties, color retention and stain resistance.
●Non-toxic, harmless and environmentally friendly products with no irritating odor.
[Scope of application]
●Mainly used for pasting and caulking of various small and medium-sized ceramic tiles and various mosaics in decorative projects with waterproof requirements.
[Construction Technology]
◆ Base surface treatment
The base surface should be firm, flat, and clean, with curing agent and release agent. The smoother concrete surface needs to be roughened before construction, and the leveling layer and the curing period of the concrete base surface should meet the requirements.
◆ Mixing
Powder and liquid. ~ Pour clean water into the bucket according to the proportion, then slowly add the powder, use an electric mixer to stir into a uniform, particle-free glue, and let it sit for a while Let it mature for about ~ minutes before stirring briefly before use.
◆ For paving construction
It is advisable to use a toothed spatula to smear this product on the work surface, scrape and comb the glue layer, about 10 minutes each time, so that it can be evenly distributed into full continuous stripes, and then apply it to the work surface. Just rub the tiles on and make sure the tiles are fully glued to the base surface.
◆ Caulking Construction
Caulking should be done after the ceramic tiles are completely dry. Caulking should be done with a rubber putty knife or sponge scraper. The product must be completely pressed into the gap and the excess slurry must be scraped off. Be careful not to bring out the slurry in the gap.
◆ Post-processing
After the caulking work is completed, let it dry naturally for ~ minutes, then clean the surface of the tiles with a slightly damp rag or sponge. After the product has dried for more than an hour, use water or tile cleaner to remove the stains on the surface of the tiles.
[Reference dosage]
●The dosage will be adjusted according to the size of the tiles. The dosage for paper tiles is about ./~/.
[Notes]
◆
The suitable construction temperature is ℃~℃. When constructing on rainy days, sheltering and protective measures must be taken, and make sure that it is not rained for at least 1 hour after construction. Rain, sun exposure and frost.
◆
If the base surface is too dry or absorbs water too quickly before construction, the wall surface should be wetted in advance until there is no clear water.
◆
In order to prevent the slurry from drying out and losing its adhesive force, it is recommended that the range of application should not exceed each time.
◆
The width of the gap filled with this product should not be less than.
◆
The base surface heated by the sun should be cooled with water. Low temperature will extend and high temperature will shorten the usable time of wet glue.
◆
Do not mix the dried slurry with water before use. The remaining slurry on the brick surface should be cleaned up with a slightly wet sponge in time.
◆
This product is weakly alkaline and will irritate the skin. Necessary protective measures should be taken during use.
[Storage and Transportation]
◆
This product should be stored off the ground on a pallet in a ventilated and dry place. It should be prevented from being soaked by rain and moisture, and should be prevented from overlapping layers, otherwise the product may be damaged. Take effect too early. During transportation, they should be protected from the sun, rain and cold, be carefully stacked, and pay attention to prevent packaging damage.
◆
Store in a cool and dry place. The shelf life of unopened products is one month.
[Statement]
Our company guarantees that the quality of manufactured products complies with relevant national requirements and specifications, but does not assume any responsibility for direct or indirect losses caused by incorrect use of this product by users.
If you have any questions, please consult the company's technical department or our local dealer.